| 1 | /*	$NetBSD: if_bridgevar.h,v 1.4 2003/07/08 07:13:50 itojun Exp $	*/ |
| 2 | |
| 3 | /* |
| 4 | * SPDX-License-Identifier: BSD-4-Clause |
| 5 | * |
| 6 | * Copyright 2001 Wasabi Systems, Inc. |
| 7 | * All rights reserved. |
| 8 | * |
| 9 | * Written by Jason R. Thorpe for Wasabi Systems, Inc. |
| 10 | * |
| 11 | * Redistribution and use in source and binary forms, with or without |
| 12 | * modification, are permitted provided that the following conditions |
| 13 | * are met: |
| 14 | * 1. Redistributions of source code must retain the above copyright |
| 15 | * notice, this list of conditions and the following disclaimer. |
| 16 | * 2. Redistributions in binary form must reproduce the above copyright |
| 17 | * notice, this list of conditions and the following disclaimer in the |
| 18 | * documentation and/or other materials provided with the distribution. |
| 19 | * 3. All advertising materials mentioning features or use of this software |
| 20 | * must display the following acknowledgement: |
| 21 | *	This product includes software developed for the NetBSD Project by |
| 22 | *	Wasabi Systems, Inc. |
| 23 | * 4. The name of Wasabi Systems, Inc. may not be used to endorse |
| 24 | * or promote products derived from this software without specific prior |
| 25 | * written permission. |
| 26 | * |
| 27 | * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND |
| 28 | * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED |
| 29 | * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| 30 | * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC |
| 31 | * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| 32 | * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| 33 | * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| 34 | * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| 35 | * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| 36 | * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| 37 | * POSSIBILITY OF SUCH DAMAGE. |
| 38 | */ |
| 39 | |
| 40 | /* |
| 41 | * Copyright (c) 1999, 2000 Jason L. Wright (jason@thought.net) |
| 42 | * All rights reserved. |
| 43 | * |
| 44 | * Redistribution and use in source and binary forms, with or without |
| 45 | * modification, are permitted provided that the following conditions |
| 46 | * are met: |
| 47 | * 1. Redistributions of source code must retain the above copyright |
| 48 | * notice, this list of conditions and the following disclaimer. |
| 49 | * 2. Redistributions in binary form must reproduce the above copyright |
| 50 | * notice, this list of conditions and the following disclaimer in the |
| 51 | * documentation and/or other materials provided with the distribution. |
| 52 | * 3. All advertising materials mentioning features or use of this software |
| 53 | * must display the following acknowledgement: |
| 54 | *	This product includes software developed by Jason L. Wright |
| 55 | * 4. The name of the author may not be used to endorse or promote products |
| 56 | * derived from this software without specific prior written permission. |
| 57 | * |
| 58 | * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR |
| 59 | * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| 60 | * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| 61 | * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, |
| 62 | * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| 63 | * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| 64 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| 65 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| 66 | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| 67 | * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| 68 | * POSSIBILITY OF SUCH DAMAGE. |
| 69 | * |
| 70 | * OpenBSD: if_bridge.h,v 1.14 2001/03/22 03:48:29 jason Exp |
| 71 | */ |
| 72 | |
| 73 | /* |
| 74 | * Data structure and control definitions for bridge interfaces. |
| 75 | */ |
| 76 | |
| 77 | #ifndef	_NET_IF_BRIDGEVAR_H_ |
| 78 | #define	_NET_IF_BRIDGEVAR_H_ |
| 79 | |
| 80 | #include <sys/types.h> |
| 81 | #include <sys/_bitset.h> |
| 82 | #include <sys/bitset.h> |
| 83 | #include <sys/callout.h> |
| 84 | #include <sys/queue.h> |
| 85 | #include <sys/condvar.h> |
| 86 | |
| 87 | #include <net/ethernet.h> |
| 88 | #include <net/if.h> |
| 89 | |
| 90 | /* |
| 91 | * Commands used in the SIOCSDRVSPEC ioctl. Note the lookup of the |
| 92 | * bridge interface itself is keyed off the ifdrv structure. |
| 93 | */ |
| 94 | #define	BRDGADD			0	/* add bridge member (ifbreq) */ |
| 95 | #define	BRDGDEL			1	/* delete bridge member (ifbreq) */ |
| 96 | #define	BRDGGIFFLGS		2	/* get member if flags (ifbreq) */ |
| 97 | #define	BRDGSIFFLGS		3	/* set member if flags (ifbreq) */ |
| 98 | #define	BRDGSCACHE		4	/* set cache size (ifbrparam) */ |
| 99 | #define	BRDGGCACHE		5	/* get cache size (ifbrparam) */ |
| 100 | #define	BRDGGIFS		6	/* get member list (ifbifconf) */ |
| 101 | #define	BRDGRTS			7	/* get address list (ifbaconf) */ |
| 102 | #define	BRDGSADDR		8	/* set static address (ifbareq) */ |
| 103 | #define	BRDGSTO			9	/* set cache timeout (ifbrparam) */ |
| 104 | #define	BRDGGTO			10	/* get cache timeout (ifbrparam) */ |
| 105 | #define	BRDGDADDR		11	/* delete address (ifbareq) */ |
| 106 | #define	BRDGFLUSH		12	/* flush address cache (ifbreq) */ |
| 107 | |
| 108 | #define	BRDGGPRI		13	/* get priority (ifbrparam) */ |
| 109 | #define	BRDGSPRI		14	/* set priority (ifbrparam) */ |
| 110 | #define	BRDGGHT			15	/* get hello time (ifbrparam) */ |
| 111 | #define	BRDGSHT			16	/* set hello time (ifbrparam) */ |
| 112 | #define	BRDGGFD			17	/* get forward delay (ifbrparam) */ |
| 113 | #define	BRDGSFD			18	/* set forward delay (ifbrparam) */ |
| 114 | #define	BRDGGMA			19	/* get max age (ifbrparam) */ |
| 115 | #define	BRDGSMA			20	/* set max age (ifbrparam) */ |
| 116 | #define	BRDGSIFPRIO		21	/* set if priority (ifbreq) */ |
| 117 | #define	BRDGSIFCOST		22	/* set if path cost (ifbreq) */ |
| 118 | #define	BRDGADDS		23	/* add bridge span member (ifbreq) */ |
| 119 | #define	BRDGDELS		24	/* delete bridge span member (ifbreq) */ |
| 120 | #define	BRDGPARAM		25	/* get bridge STP params (ifbropreq) */ |
| 121 | #define	BRDGGRTE		26	/* get cache drops (ifbrparam) */ |
| 122 | #define	BRDGGIFSSTP		27	/* get member STP params list |
| 123 | 					 * (ifbpstpconf) */ |
| 124 | #define	BRDGSPROTO		28	/* set protocol (ifbrparam) */ |
| 125 | #define	BRDGSTXHC		29	/* set tx hold count (ifbrparam) */ |
| 126 | #define	BRDGSIFAMAX		30	/* set max interface addrs (ifbreq) */ |
| 127 | #define	BRDGSIFPVID		31	/* set if PVID */ |
| 128 | #define	BRDGSIFVLANSET		32	/* set if vlan set */ |
| 129 | #define	BRDGGIFVLANSET		33	/* get if vlan set */ |
| 130 | #define	BRDGGFLAGS		34	/* get bridge flags (ifbrparam) */ |
| 131 | #define	BRDGSFLAGS		35	/* set bridge flags (ifbrparam) */ |
| 132 | #define	BRDGGDEFPVID		36	/* get default pvid (ifbrparam) */ |
| 133 | #define	BRDGSDEFPVID		37	/* set default pvid (ifbrparam) */ |
| 134 | #define	BRDGSIFVLANPROTO	38	/* set if vlan protocol (ifbreq) */ |
| 135 | |
| 136 | /* BRDGSFLAGS, Bridge flags (non-interface-specific) */ |
| 137 | typedef uint32_t ifbr_flags_t; |
| 138 | |
| 139 | #define	IFBRF_VLANFILTER	(1U<<0)	/* VLAN filtering enabled */ |
| 140 | #define	IFBRF_DEFQINQ		(1U<<1)	/* 802.1ad Q-in-Q allowed by default */ |
| 141 | |
| 142 | #define	IFBRFBITS	"\020\01VLANFILTER\02DEFQINQ" |
| 143 | |
| 144 | /* |
| 145 | * Generic bridge control request. |
| 146 | */ |
| 147 | struct ifbreq { |
| 148 | 	char		ifbr_ifsname[IFNAMSIZ];	/* member if name */ |
| 149 | 	uint32_t	ifbr_ifsflags;		/* member if flags */ |
| 150 | 	uint32_t	ifbr_stpflags;		/* member if STP flags */ |
| 151 | 	uint32_t	ifbr_path_cost;		/* member if STP cost */ |
| 152 | 	uint8_t		ifbr_portno;		/* member if port number */ |
| 153 | 	uint8_t		ifbr_priority;		/* member if STP priority */ |
| 154 | 	uint8_t		ifbr_proto;		/* member if STP protocol */ |
| 155 | 	uint8_t		ifbr_role;		/* member if STP role */ |
| 156 | 	uint8_t		ifbr_state;		/* member if STP state */ |
| 157 | 	uint32_t	ifbr_addrcnt;		/* member if addr number */ |
| 158 | 	uint32_t	ifbr_addrmax;		/* member if addr max */ |
| 159 | 	uint32_t	ifbr_addrexceeded;	/* member if addr violations */ |
| 160 | 	ether_vlanid_t	ifbr_pvid;		/* member if PVID */ |
| 161 | 	uint16_t	ifbr_vlanproto;		/* member if VLAN protocol */ |
| 162 | 	uint8_t		pad[28]; |
| 163 | }; |
| 164 | |
| 165 | /* BRDGGIFFLAGS, BRDGSIFFLAGS */ |
| 166 | #define	IFBIF_LEARNING		0x0001	/* if can learn */ |
| 167 | #define	IFBIF_DISCOVER		0x0002	/* if sends packets w/ unknown dest. */ |
| 168 | #define	IFBIF_STP		0x0004	/* if participates in spanning tree */ |
| 169 | #define	IFBIF_SPAN		0x0008	/* if is a span port */ |
| 170 | #define	IFBIF_STICKY		0x0010	/* if learned addresses stick */ |
| 171 | #define	IFBIF_BSTP_EDGE		0x0020	/* member stp edge port */ |
| 172 | #define	IFBIF_BSTP_AUTOEDGE	0x0040	/* member stp autoedge enabled */ |
| 173 | #define	IFBIF_BSTP_PTP		0x0080	/* member stp point to point */ |
| 174 | #define	IFBIF_BSTP_AUTOPTP	0x0100	/* member stp autoptp enabled */ |
| 175 | #define	IFBIF_BSTP_ADMEDGE	0x0200	/* member stp admin edge enabled */ |
| 176 | #define	IFBIF_BSTP_ADMCOST	0x0400	/* member stp admin path cost */ |
| 177 | #define	IFBIF_PRIVATE		0x0800	/* if is a private segment */ |
| 178 | #define	IFBIF_QINQ		0x1000	/* if allows 802.1ad Q-in-Q */ |
| 179 | |
| 180 | #define	IFBIFBITS	"\020\001LEARNING\002DISCOVER\003STP\004SPAN" \ |
| 181 | 			"\005STICKY\014PRIVATE\006EDGE\007AUTOEDGE\010PTP" \ |
| 182 | 			"\011AUTOPTP\015QINQ" |
| 183 | #define	IFBIFMASK	~(IFBIF_BSTP_EDGE|IFBIF_BSTP_AUTOEDGE|IFBIF_BSTP_PTP| \ |
| 184 | 			IFBIF_BSTP_AUTOPTP|IFBIF_BSTP_ADMEDGE| \ |
| 185 | 			IFBIF_BSTP_ADMCOST)	/* not saved */ |
| 186 | |
| 187 | /* BRDGFLUSH */ |
| 188 | #define	IFBF_FLUSHDYN		0x00	/* flush learned addresses only */ |
| 189 | #define	IFBF_FLUSHALL		0x01	/* flush all addresses */ |
| 190 | |
| 191 | /* |
| 192 | * Interface list structure. |
| 193 | */ |
| 194 | struct ifbifconf { |
| 195 | 	uint32_t	ifbic_len;	/* buffer size */ |
| 196 | 	union { |
| 197 | 		caddr_t	ifbicu_buf; |
| 198 | 		struct ifbreq *ifbicu_req; |
| 199 | 	} ifbic_ifbicu; |
| 200 | #define	ifbic_buf	ifbic_ifbicu.ifbicu_buf |
| 201 | #define	ifbic_req	ifbic_ifbicu.ifbicu_req |
| 202 | }; |
| 203 | |
| 204 | /* |
| 205 | * Bridge address request. |
| 206 | */ |
| 207 | struct ifbareq { |
| 208 | 	char		ifba_ifsname[IFNAMSIZ];	/* member if name */ |
| 209 | 	unsigned long	ifba_expire;		/* address expire time */ |
| 210 | 	uint8_t		ifba_flags;		/* address flags */ |
| 211 | 	uint8_t		ifba_dst[ETHER_ADDR_LEN];/* destination address */ |
| 212 | 	ether_vlanid_t	ifba_vlan;		/* vlan id */ |
| 213 | }; |
| 214 | |
| 215 | #define	IFBAF_TYPEMASK	0x03	/* address type mask */ |
| 216 | #define	IFBAF_DYNAMIC	0x00	/* dynamically learned address */ |
| 217 | #define	IFBAF_STATIC	0x01	/* static address */ |
| 218 | #define	IFBAF_STICKY	0x02	/* sticky address */ |
| 219 | |
| 220 | #define	IFBAFBITS	"\020\1STATIC\2STICKY" |
| 221 | |
| 222 | /* |
| 223 | * Address list structure. |
| 224 | */ |
| 225 | struct ifbaconf { |
| 226 | 	uint32_t	ifbac_len;	/* buffer size */ |
| 227 | 	union { |
| 228 | 		caddr_t ifbacu_buf; |
| 229 | 		struct ifbareq *ifbacu_req; |
| 230 | 	} ifbac_ifbacu; |
| 231 | #define	ifbac_buf	ifbac_ifbacu.ifbacu_buf |
| 232 | #define	ifbac_req	ifbac_ifbacu.ifbacu_req |
| 233 | }; |
| 234 | |
| 235 | /* |
| 236 | * Bridge parameter structure. |
| 237 | */ |
| 238 | struct ifbrparam { |
| 239 | 	union { |
| 240 | 		uint32_t ifbrpu_int32; |
| 241 | 		uint16_t ifbrpu_int16; |
| 242 | 		uint8_t ifbrpu_int8; |
| 243 | 	} ifbrp_ifbrpu; |
| 244 | }; |
| 245 | #define	ifbrp_csize	ifbrp_ifbrpu.ifbrpu_int32	/* cache size */ |
| 246 | #define	ifbrp_ctime	ifbrp_ifbrpu.ifbrpu_int32	/* cache time (sec) */ |
| 247 | #define	ifbrp_prio	ifbrp_ifbrpu.ifbrpu_int16	/* bridge priority */ |
| 248 | #define	ifbrp_proto	ifbrp_ifbrpu.ifbrpu_int8	/* bridge protocol */ |
| 249 | #define	ifbrp_txhc	ifbrp_ifbrpu.ifbrpu_int8	/* bpdu tx holdcount */ |
| 250 | #define	ifbrp_hellotime	ifbrp_ifbrpu.ifbrpu_int8	/* hello time (sec) */ |
| 251 | #define	ifbrp_fwddelay	ifbrp_ifbrpu.ifbrpu_int8	/* fwd time (sec) */ |
| 252 | #define	ifbrp_maxage	ifbrp_ifbrpu.ifbrpu_int8	/* max age (sec) */ |
| 253 | #define	ifbrp_cexceeded ifbrp_ifbrpu.ifbrpu_int32	/* # of cache dropped |
| 254 | 							 * addresses */ |
| 255 | #define	ifbrp_flags	ifbrp_ifbrpu.ifbrpu_int32	/* bridge flags */ |
| 256 | #define	ifbrp_defpvid	ifbrp_ifbrpu.ifbrpu_int16	/* default pvid */ |
| 257 | #define	ifbrp_vlanproto	ifbrp_ifbrpu.ifbrpu_int8	/* vlan protocol */ |
| 258 | |
| 259 | /* |
| 260 | * Bridge current operational parameters structure. |
| 261 | */ |
| 262 | struct ifbropreq { |
| 263 | 	uint8_t		ifbop_holdcount; |
| 264 | 	uint8_t		ifbop_maxage; |
| 265 | 	uint8_t		ifbop_hellotime; |
| 266 | 	uint8_t		ifbop_fwddelay; |
| 267 | 	uint8_t		ifbop_protocol; |
| 268 | 	uint16_t	ifbop_priority; |
| 269 | 	uint16_t	ifbop_root_port; |
| 270 | 	uint32_t	ifbop_root_path_cost; |
| 271 | 	uint64_t	ifbop_bridgeid; |
| 272 | 	uint64_t	ifbop_designated_root; |
| 273 | 	uint64_t	ifbop_designated_bridge; |
| 274 | 	struct timeval	ifbop_last_tc_time; |
| 275 | }; |
| 276 | |
| 277 | /* |
| 278 | * Bridge member operational STP params structure. |
| 279 | */ |
| 280 | struct ifbpstpreq { |
| 281 | 	uint8_t		ifbp_portno;		/* bp STP port number */ |
| 282 | 	uint32_t	ifbp_fwd_trans;		/* bp STP fwd transitions */ |
| 283 | 	uint32_t	ifbp_design_cost;	/* bp STP designated cost */ |
| 284 | 	uint32_t	ifbp_design_port;	/* bp STP designated port */ |
| 285 | 	uint64_t	ifbp_design_bridge;	/* bp STP designated bridge */ |
| 286 | 	uint64_t	ifbp_design_root;	/* bp STP designated root */ |
| 287 | }; |
| 288 | |
| 289 | /* |
| 290 | * Bridge STP ports list structure. |
| 291 | */ |
| 292 | struct ifbpstpconf { |
| 293 | 	uint32_t	ifbpstp_len;	/* buffer size */ |
| 294 | 	union { |
| 295 | 		caddr_t	ifbpstpu_buf; |
| 296 | 		struct ifbpstpreq *ifbpstpu_req; |
| 297 | 	} ifbpstp_ifbpstpu; |
| 298 | #define	ifbpstp_buf	ifbpstp_ifbpstpu.ifbpstpu_buf |
| 299 | #define	ifbpstp_req	ifbpstp_ifbpstpu.ifbpstpu_req |
| 300 | }; |
| 301 | |
| 302 | #define STP_STATES \ |
| 303 | "disabled", \ |
| 304 | "listening", \ |
| 305 | "learning", \ |
| 306 | "forwarding", \ |
| 307 | "blocking", \ |
| 308 | "discarding" |
| 309 | |
| 310 | #define STP_PROTOS \ |
| 311 | "stp", \ |
| 312 | "-", \ |
| 313 | "rstp" |
| 314 | |
| 315 | #define STP_ROLES \ |
| 316 | "disabled", \ |
| 317 | "root", \ |
| 318 | "designated", \ |
| 319 | "alternate", \ |
| 320 | "backup" |
| 321 | |
| 322 | #define PV2ID(pv, epri, eaddr)	do { \ |
| 323 | 	epri = pv >> 48; \ |
| 324 | 	eaddr[0] = pv >> 40; \ |
| 325 | 	eaddr[1] = pv >> 32; \ |
| 326 | 	eaddr[2] = pv >> 24; \ |
| 327 | 	eaddr[3] = pv >> 16; \ |
| 328 | 	eaddr[4] = pv >> 8; \ |
| 329 | 	eaddr[5] = pv >> 0; \ |
| 330 | } while (0) |
| 331 | |
| 332 | /* |
| 333 | * Bridge VLAN access request. |
| 334 | */ |
| 335 | #define	BRVLAN_SETSIZE	4096 |
| 336 | typedef __BITSET_DEFINE(ifbvlan_set, BRVLAN_SETSIZE) ifbvlan_set_t; |
| 337 | |
| 338 | #define	BRVLAN_SET(set, bit)	__BIT_SET(BRVLAN_SETSIZE, (bit), set) |
| 339 | #define	BRVLAN_CLR(set, bit)	__BIT_CLR(BRVLAN_SETSIZE, (bit), set) |
| 340 | #define	BRVLAN_TEST(set, bit)	__BIT_ISSET(BRVLAN_SETSIZE, (bit), set) |
| 341 | |
| 342 | #define	BRDG_VLAN_OP_SET	1	/* replace current vlan set */ |
| 343 | #define	BRDG_VLAN_OP_ADD	2	/* add vlans to current set */ |
| 344 | #define	BRDG_VLAN_OP_DEL	3	/* remove vlans from current set */ |
| 345 | |
| 346 | struct ifbif_vlan_req { |
| 347 | 	char		bv_ifname[IFNAMSIZ]; |
| 348 | 	uint8_t		bv_op; |
| 349 | 	ifbvlan_set_t	bv_set; |
| 350 | }; |
| 351 | |
| 352 | #ifdef _KERNEL |
| 353 | |
| 354 | #define BRIDGE_INPUT(_ifp, _m)	do {			\ |
| 355 | 	KASSERT((_ifp)->if_bridge_input != NULL,	\ |
| 356 | 	 ("%s: if_bridge not loaded!", __func__));	\ |
| 357 | 	_m = (*(_ifp)->if_bridge_input)(_ifp, _m);	\ |
| 358 | 	if (_m != NULL)	{				\ |
| 359 | 		_ifp = _m->m_pkthdr.rcvif;		\ |
| 360 | 		m->m_flags &= ~M_BRIDGE_INJECT;		\ |
| 361 | 	}						\ |
| 362 | } while (0) |
| 363 | |
| 364 | #define BRIDGE_OUTPUT(_ifp, _m, _err)	do { 	\ |
| 365 | 	KASSERT((_ifp)->if_bridge_output != NULL,	\ |
| 366 | 	 ("%s: if_bridge not loaded!", __func__));	\ |
| 367 | 	_err = (*(_ifp)->if_bridge_output)(_ifp, _m, NULL, NULL); \ |
| 368 | } while (0) |
| 369 | |
| 370 | extern	void (*bridge_dn_p)(struct mbuf *, struct ifnet *); |
| 371 | extern	bool (*bridge_same_p)(const void *, const void *); |
| 372 | extern	void *(*bridge_get_softc_p)(struct ifnet *); |
| 373 | extern	bool (*bridge_member_ifaddrs_p)(void); |
| 374 | |
| 375 | #endif /* _KERNEL */ |
| 376 | |
| 377 | #endif /* _NET_IF_BRIDGEVAR_H_ */ |